Arkel REVKON Car Top Inspection Controller Board (for ARL-500)
Optimize your ARL-500 installation with the Arkel REVKON Car Top Board. Features CANbus serial communication, inspection operation control, and seamless integration with Arkel ARL-500 systems for reliable lift maintenance.
- Dedicated ARL-500 Compatibility: Engineered specifically as the peripheral car top unit for the ARL-500 control system, ensuring perfect synchronization.
- CANbus Serial Communication: Utilizes advanced serial communication to transmit data between the cabin and the machine room, eliminating the need for massive traveling cables.
- Inspection Box Integration: Designed to be installed inside the standard inspection box (Revizyon Kutusu), serving as the main interface for maintenance operations.
- Plug & Play Logic: Supports the ARL-500’s pre-wired electrical architecture, reducing installation errors and labor time.
- Comprehensive Signal Management: Collects and processes all car-side signals including calls, door commands, and safety sensors before sending them to the main controller.
Guaranteed Safe Checkout
The Arkel REVKON is the dedicated car top control unit designed exclusively for the ARL-500 Elevator Control System. Mounted within the inspection box on top of the cabin, this board acts as the central communication hub, collecting all cabin signals and transmitting them to the main controller via a serial CANbus connection. It simplifies shaft wiring by replacing complex parallel cables with a streamlined serial interface.
Technical Specifications: REVKON
| Specification | Detail |
|---|---|
| Product Model | REVKON |
| Product Code | 1001453 |
| Compatibility | Arkel ARL-500 Control System |
| Communication | Serial CANbus |
| Installation Location | Car Top / Inspection Box |
| Function | Car Top Connection & Control |
| Approximate Price (EUR) | – |
Product Description
The Arkel REVKON (1001453) represents the “distributed intelligence” of the ARL-500 system. In traditional elevators, every button, switch, and sensor on the car requires a separate wire running all the way to the machine room. The REVKON board solves this by digitizing these signals at the source (the car top) and sending them via a high-speed CANbus line to the main controller,.
Engineered for Maintenance (Inspection Mode): Located within the inspection box, the REVKON board manages the “Inspection Mode” logic. When a technician switches the elevator to inspection, the REVKON board processes the Up/Down movement commands locally, ensuring safe, reduced-speed operation for shaft maintenance.
Seamless Integration: As part of the ARL-500 ecosystem, REVKON works in harmony with other peripherals. It allows for the connection of cabin operating panels and door operators directly on the car top, significantly reducing the thickness and cost of the traveling cable required in the shaft.
Frequently Asked Questions
Q1: Is the REVKON board compatible with the Arkel ARCODE system?
No. The REVKON is specifically designed for the ARL-500 controller. The ARCODE system uses a different car top unit called the IBC-S (Inspection Box Controller),.
Q2: What is the main advantage of using REVKON in an ARL-500 system?
The primary advantage is the serial communication capability. It collects dozens of signals from the elevator car (buttons, sensors, door contacts) and transmits them over a few wires (CANbus), drastically simplifying the wiring and reducing installation time.
Q3: Where should this board be mounted?
The REVKON board is mounted inside the Inspection Box (Revizyon Kutusu) located on top of the elevator cabin. It serves as the connection point for the inspection buttons and the traveling cable.
Q4: Does this board support door operator connections?
Yes. As the primary car top controller, the REVKON board provides the necessary interface points to connect and control the automatic door operators, managing open/close commands received from the main ARL-500 unit.
| Weight | 0,6 kg |
|---|---|
| Dimensions | 28 × 20 × 4 cm |
Related Products
Reviews
There are no reviews yet.